GuidesMeta ads

How to choose a Meta attribution setting

A Meta attribution setting is the rule for which conversions count as caused by an ad: a click or view, and how many days after it. Set it on the ad set, keep one standard for reporting, and compare windows side by side to see how much credit comes from clicks versus views before you cut or scale anything.

Updated November 16, 20265 steps5 min read

Audit my Meta ads →

$1 today. Cancel anytime before day 7.

Setting and using an attribution window
  1. 1Learn the termsClick windows, view windows, and what each counts.
  2. 2Open the ad set settingFind the attribution setting under optimization.
  3. 3Pick one standardUse the same window for every weekly report.
  4. 4Compare windowsView the same data under several settings.
  5. 5Reconcile with your analyticsCheck the gap against GA4 or your store.
On this page
  1. What an attribution setting is
  2. The options you will see
  3. Where to set it, and what it changes
  4. Compare windows in your report
  5. Mistakes to avoid when choosing a window
  6. Reconcile with GA4 and your store
  7. Questions

What an attribution setting is

When someone buys, Meta checks whether they clicked or viewed one of your ads within a window before the purchase, and if so, gives the ad credit. “7-day click, 1-day view” means a conversion counts if it happens within seven days of a click or one day of a view. The window decides how many conversions appear in Ads Manager, so the same campaign can look better or worse under different settings.

A click is a stronger signal than a view, so a click-only setting is the conservative choice. View-through credit counts people who saw the ad and later bought, which can be real influence or just coincidence. Meta narrowed what counts as a click for attribution in recent changes, so read the current definitions in your account before assuming old benchmarks still apply.

The options you will see

Meta offers a short list of combinations, usually one-day click, seven-day click, and one-day view, and for video, one-day engaged view. Older seven-day view and 28-day windows were retired, so reports from before that change are not comparable with current ones. Which options are shown depends on the campaign objective and your account.

The default for most conversion campaigns is seven-day click plus one-day view. Longer click windows suit considered purchases with a long path from ad to sale. A shorter window suits impulse buys and gives a stricter reading of what the ads did that week.

Want this checked in your Meta account?

Reads your campaigns, ad sets, ads and pixel health. Every change waits for your approval.

Where to set it, and what it changes

The setting lives on the ad set, in the optimization and delivery section, and it affects which conversions the system optimizes toward. It also changes the numbers that appear in reports by default. A different window changes how delivery learns, not only how results are labelled, so change it deliberately and not mid-test.

Meta separates the window used for optimization from the one you view in reports. You can look at a report under a different attribution setting without changing delivery. Use that to explore, and change the ad set only when you have decided what you want the system to chase. See Meta attribution settings for more on the differences.

Compare windows in your report

In Ads Manager, open the columns menu and choose to compare attribution settings. You will see results side by side, for example one-day click against seven-day click plus one-day view. If most of the credit disappears under click-only, much of your reported performance comes from views, and you should decide how much you believe it.

Use the result to set a standard for reporting. Many teams pick seven-day click plus one-day view as the default and look at one-day click as a check on how much is inflated. Write the choice at the top of the weekly report, which makes week-to-week comparisons meaningful. See Facebook ads reporting.

Mistakes to avoid when choosing a window

The first mistake is comparing numbers across different windows. If last month was reported under one setting and this month under another, the change you see may be the setting. Write the window on every report and do not change it without a note.

The second is treating view-through credit as proof. Some people who saw an ad would have bought anyway. A high share of view-through conversions deserves skepticism and, ideally, a test: pause a campaign for a short period, or run a holdout, and see whether overall sales move. An incrementality test is the honest answer to what a channel adds.

The third is changing the ad set setting in the middle of learning. It changes what the system optimizes for and can restart the learning phase, so a change made to fix a report can hurt delivery. Do your exploring with the report-level comparison and change the ad set only on purpose. Finally, remember that ad blockers, privacy settings, and cross-device journeys mean any window undercounts some real sales. No window is correct; a consistent one is useful.

A practical routine: pick the window once a quarter, write it in your reporting doc, and review the click-only comparison monthly. If the gap between click-only and the default widens, that is a prompt to look at what changed, such as a new video format that earns more views, rather than a reason to rewrite your numbers. When you explain results to a client or a boss, say which window you used in the first line. It prevents most arguments about whose number is right.

Reconcile with GA4 and your store

Your analytics tool will not match Meta. GA4 uses its own attribution model, mostly last click, and sees only tagged sessions, while Meta counts view-through conversions and its own windows. A gap is expected. The useful question is whether the ratio stays steady, so use Meta for trends within the platform and your store or CRM for the total. The reasons are laid out in Facebook ads vs GA4 and Google Ads vs Meta.

The part you can hand off: Sprites can read your Meta results under your chosen setting, check pixel and Conversions API health so the counts are trustworthy, and write the comparison into a weekly review. Changes arrive as approval cards.

Questions

What is the 7-day click, 1-day view attribution window?

It counts a conversion if it happens within seven days of someone clicking your ad or within one day of them viewing it. It is the usual default for conversion campaigns in Meta Ads Manager.

What is the purpose of attribution?

Attribution decides which marketing touchpoints get credit for a sale or lead, so you can tell what is working and where to put budget. Different rules give different answers, so choose one and use it consistently.

Should I use click-only attribution?

Click-only is more conservative and a good check on view-through credit. Many advertisers keep the default for reporting and compare click-only to see how much depends on views. For a retention or brand campaign, views matter more.

Why does Meta report more conversions than GA4?

Meta counts conversions after views as well as clicks and uses its own windows, while GA4 usually credits the last tagged click. Both can be right under their own rules. Compare trends, not totals.

Keep going

Have Sprites do this in your Meta account

  • Reads your campaigns, ad sets, ads and pixel health
  • Drafts budget, audience and creative changes as cards
  • Every change waits for your approval